The Main DSHH package

The DSHH package comes to you in 2 shipments, based on the construction progress of the home. In advance of the shipments the pipe design will be completed by DSHH and will vary with respect to ‘normal’ hydronic installations slightly.

SHIPMENT #1

Includes the special in-ground, and in-slab O² proof pipes, shipped in time to be included in the earthworks and foundation portion of the build.

SHIPMENT #2

Includes the Stainless steel pump station as a completed ready to connect unit, the Special; solar panels, the piping manifold, the exclusive digital controller, instruction & operating manual on a CD/DVD, and the power UPS.

If at anytime, while you are browsing through our options section, you have a question related to any of our services don't hesitate to call us at +64-9-815-6664 or send us an e-mail

OPTION 1: Solar Hot Water integration
This option increases the number of solar panels based on the family and home size & adds in a min. 300L Solar Hot water cylinder to the system.

The double benefit of this most solar hot water systems shut down once the hot water cylinder is up to temperature. the DSHH system uses the otherwise wasted hot water to heat the home or be stored.

OPTION 2: Wetback/boiler Integration
This option adds in an additional pump, controller and the connecting pipes within the Pump station. In most cases the hot water cylinder will require an additional heat exchanger coil. IN some cases where pressurised wetbacks are no allowed, and intermediate small hot water cylinder may be required in the proximity of the wetback
.
The customer is expected to connect the Wetback to the pump station with approriate copper pipes.

OPTION 3: Heat Pump backup Integration
This option adds in a backup thermostat plus a hot water heat pump to top up the water temperatures as backup. This is especially beneficial in the early years as the heat core heats up, but is equally significant with respect to the hot water as it it also backs up the Hot Water.

The DSHH controller controls the timing of the backup for hot water and is programmable into the unit. There are 3 time groups that can be used, most people need only one. As a rule this can be set at a time in advance of showering to ensure enough hot water for showers, typically 2hrs with the 9kW HP.
 

OPTION 4: Integration into commercial or government facilities.
Custom designed systems can be integrated to suit a myriad of applications and are handled on a one to one basis. In these cases the DSHH engineering is scaled up to commercial levels of heat generation, and storage with each power block level peaking at ~40kW ea. Systems can be scaled up or down from this point.

Contact us for further details:

Download Catalogue or brochure